DIY ring

Yesterday I didn't feel like learning (I'm having a test week at the moment) so I decided to make a ring from a clip earring. You can put all sorts of things on the ring, and it only takes a few minutes! (plus the drying)
Scroll down for a simple tutorial:

What you need:

• jewelry glue (I used glue from the brand MakeMe!)
• pliers
• something to put on the ring (like a brooch, clip earring, flower or a nice button)
• a plain ring (I used one from the brand MakeMe!)

step 1: Make sure the thing for on the ring is as flat as possible.
(I took the clip off)

step 2: if the thing for on your ring isn't fitting on your basic ring,
you should take the circle with holes (this must be in the package from your plain ring)
and glue it. Also glue the thing for on your ring. ('thing for on your ring' sounds really stupid,
but I just don't know how to call it! ;)

step 3: press the glued parts on each other and wait until it's dry.

step 4: put glue on the ring and the thing for on the ring.

Step 5: press the two glued parts on each other.
Now look for something where you can stick the ring in, like Styrofoam. (I used cardboard)
Found it? Put the ring in it and wait for 24h so your glue can dry completely.

And tadaaa, here is your ring!
That was easy!